Tentipi Eldfell stove flue info request

[Boris]

This probably aimed at Dave but someone else may be able to help. On the flue for the Eldfell what diameter is the flue and the standoff (which stops the flue scorching the material) where it passes through the hole in the crown of the tipi?

I'm hopping to get something custom made but need to understand some dimensions first.

Thanks

[DaveS]

I was told it was 4" but haven't actually measured it.
I can tell you there was a gap between the outer stove heat deflector pipe thingy and the canvas, so the hole perhaps might be 4.5"

[Boris]

I was told it was 4" but haven't actually measured it.
I can tell you there was a gap between the outer stove heat deflector pipe thingy and the canvas, so the hole perhaps might be 4.5"

Any chance you could measure it for me Dave. I only really need the diameter of the perforated bit that protects the tent but a measure of the section that goes in it (so I can calculate the air gap) would be useful.

Ta

[DaveS]

Any chance you could measure it for me Dave. I only really need the diameter of the perforated bit that protects the tent but a measure of the section that goes in it (so I can calculate the air gap) would be useful.

Ta

Just measured it. 14" cm diameter.

[DaveS]

Just measured it. 14" cm diameter.

So it's
Bugger just seen you want the inner section as well!!! Well that has to be 4" wide which would give a 3/4" gap roughly all the way around which seems about right.

[Boris]

So it's
Bugger just seen you want the inner section as well!!! Well that has to be 4" wide which would give a 3/4" gap roughly all the way around which seems about right.

Thanks dave 14cm works out at 5.5 inches I was concerned that the opening was only 4 inches and I would need a smaller flue.